Fuel Valve Lever; Starter Grip; Throttle Lever; Choke Knob - Honda HSS928A Owner's Manual

Hide thumbs Also See for HSS928A:
Table of Contents

Advertisement

Fuel Valve Lever

The fuel valve opens and closes the
fuel line leading from the fuel tank to
the carburetor. Make sure that the
fuel valve lever is positioned exactly
at either the ON or OFF position.
When the snow blower is not in use,
always leave the fuel valve lever in
the OFF position to reduce the
possibility of fuel leakage.

Starter Grip

Pull the starter grip to start the
engine. See
page 10
for detailed
starting procedures.

Throttle Lever

The throttle lever controls
engine speed from SLOW to
FAST, and it will stay in any
designated position.
NOTE: For best snow blowing
performance, keep the
throttle lever in the
FAST position.

Choke Knob

The choke knob opens and closes
the choke valve in the carburetor.
The CLOSED position enriches the
fuel mixture for starting a cold
engine.
The OPEN position provides the
correct fuel mixture for operation
after starting, and for restarting a
warm engine.

Shift Lever

Forward and reverse directions can be selected by shifting the shift
lever. The lever will remain in any designated position. Actual
movement of the snow blower takes effect when the drive clutch lever
is engaged.
Set the lever in "N" (Neutral) when the snow blower is not in use and
when starting.
8
FUEL VALVE LEVER
OFF
STARTER GRIP
FAST
FAST
FAST
SLOW
SLOW
SLOW
THROTTLE LEVER
OPEN
CLOSED
CHOKE KNOB
FORWARD
FAST
SLOW
ON
NEUTRAL
SLOW
FAST
REVERSE

Chute Control Switch

Use the chute
control switch to
turn the snow
discharge chute
right or left and up
or down.
The engine must be
running to operate
the chute control
switch. Chute
movement speed
will increase with
engine speed. For
maximum speed,
move the throttle
lever to the fastest
position when using the chute control switch.

Drive Clutch Lever

Depress the drive clutch lever to move the snow blower forward or
backward based on the position of the shift lever (see above).
When transporting the snow blower, depress the drive clutch lever
without the auger clutch lever.
DRIVE CLUTCH LEVER
N (NEUTRAL)
REVERSE
SHIFT LEVER
DOWN
LEFT
UP
CHUTE CONTROL
SWITCH
DISENGAGED
DRIVE
CLUTCH
DISENGAGE
ENGAGE
ENGAGED
FORWARD
RIGHT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hss1332a

Table of Contents