Clearing Snow - Honda HSS928A Owner's Manual

3. Move the throttle lever to the
SLOW position.
4. Turn the engine switch to the
OFF position.
5. Turn the fuel valve lever to the
OFF position.

Clearing Snow

1. Move the throttle lever to the
FAST position for normal
operation.
12
FAST
SLOW
THROTTLE LEVER
OFF
ENGINE
SWITCH
FUEL VALVE LEVER
OFF
ON
FAST
THROTTLE
LEVER
2. Check that the auger
clutch lever is
released and move
the shift lever to
R (REVERSE)
select the desired
drive speed.
Faster ground speed
is recommended for
removing heavy or
wet snow.
Slower ground
speed is
recommended for
removing deep or hard-packed snow.
3. Track-type models only: Set the auger height to the desired
position (see page 9).
4. Adjust the throwing direction by using the chute control switch (see
page 8).
5. Depress the auger clutch
lever. The auger will
rotate and the machine
will clear snow when you
depress the auger clutch
lever.
6. Depress the drive clutch
lever to self-propel the
snow blower.
If the transmission shift
lever (see page 8) is in
the "F" (FORWARD)
position, the hydrostatic
drive will propel the
snow blower forward
when you squeeze the
drive clutch lever.
When both levers are depressed, the drive clutch lever locks the
auger clutch lever down. This frees your right hand to operate the
other snow blower controls. Releasing the drive clutch lever
unlocks and releases the auger clutch lever.
To transport the snow blower to another location, use the drive
clutch lever only. Release both the drive clutch lever and auger
clutch lever, and then depress the drive clutch lever.
7. Release both clutch
DRIVE CLUTCH LEVER
levers to stop
clearing and
moving.
N (NEUTRAL)
F (FORWARD)
SLOW
SLOW
FAST
FAST
SHIFT LEVER
AUGER CLUTCH LEVER
DRIVE CLUTCH LEVER
AUGER CLUTCH
LEVER