BT 1100 User Manual page 21

Quartet 1100 User Guide – Edition 5 – 17.8.00
The following erasing and
re-registering procedure can be used
for re-registering an original
handset. If you wish to re-register
please follow the instruction below,
using your original handset where
it refers to additional handset.
Before re-registering, the
old registration code must
first be erased. Once erased
you can re-register your
additional handset by
following the registration
process on p18.
Press the
button
Press the
button.
Press the
Press the
button.
You will hear a confirmation
tone.
Your old registration code
is now erased and you can
re-register your additional
handset following the
procedure opposite.
Check that your additional handset
is registered correctly by pressing
the button and listening for
a dial tone. If you do not hear a
dial tone your additional handset
is either out of range of the base
unit or it has not been registered
properly, or the base unit line cord
is not plugged in.
button 4 times.
19