BT Freestyle 1050 User Manual page 26

To change your outgoing message
Press the
of hearing either "End of messages"
or
"You have no messages".
Your Freestyle 1050 gives a long beep
after the second press of the
tell you it is starting to record.
When you have finished recording your
new message, press and hold the
button for 1 second.
Your Freestyle 1050 will beep and play
your new outgoing message to confirm
recording.
To check your outgoing message
Press the
Freestyle 1050 is waiting for an
instruction.
Your outgoing message is played.
At the end you have 8 seconds in which
to give your machine another instruction.
22
button twice within 8 seconds
7
button to
7
button while your
9
To go back to the pre-set outgoing
message
Press buttons in order shown
Press the
Freestyle 1050 is waiting for an
instruction.
Your outgoing message is played.
While the message is playing, press the
button. Callers will now hear your
5
Freestyle 1050 pre-recorded message
"Hello, your call cannot be taken at the
0
moment, so please leave your message
after the tone."
To screen a call via the handset
When your Freestyle 1050 starts to
record an incoming message, the
handset gives 3 beeps and the
light flashes.
Press the
You can hear the caller on the handset.
Or
To interrupt recording and talk to your
caller, press the
button while your
9
IN USE
button.
SECRECY/SCREEN
button.
TALK