Table of Contents
Advertisement
FLEXIDOME IP starlight 6000 VR
7
Configuration
The camera normally provides an optimal picture without the need for further adjustments.
However, you can use a web browser via the network to access a menu to change camera
settings such as user modes, passwords, picture settings and network settings.
Configuration options using the menu system on the camera itself are limited to basic setup
via the Wizard.
1.
2.
3.
4.
If required, configure the parameters in other menus to suit your working environment (for
example, ID, passwords, date and time). Refer to the operation manuals of the software for
more information.
Bosch Security Systems B.V.
Open the camera in the web browser.
Click Configuration in the title bar.
Select Camera >> Installer Menu from the side bar.
Select the application variant before any other changes are made, as the camera reboots
automatically and resets the factory defaults when the application variant is changed.
Installation manual
Configuration | en
19
03.2019 | V2.0 | AM18-Q0711
Advertisement
Table of Contents
