Interval Timer Photography - FujiFilm X-A10 Owner's Manual

Interval Timer Photography

Interval Timer Photography
Follow the steps below to confi gure the camera to take photos automatically at a preset interval.
1
Press MENU/OK in shooting mode to display the shooting menu. Press the selector up or down to
highlight o INTERVAL TIMER SHOOTING and press MENU/OK.
2 Use the selector to choose the interval and number of shots. Press MENU/OK to
proceed.
3
Use the selector to choose the starting time and then press MENU/OK. Shooting
will start automatically.
Q Interval timer photography can not be used at a shutter speed of B (bulb) or during panorama or multiple
exposure photography. In burst mode, only one picture will be taken each time the shutter is released.
R Use of a tripod is recommended.
R Check the battery level before starting. We recommend using an optional AC-9V AC power adapter and
CP-W126 DC coupler.
R The display turns off between shots and lights a few seconds before the next shot is taken. The display can be
activated at any time by pressing the shutter button all the way down.
INTERVAL/NUMBER OF TIMES
INTERVAL NUMBER OF TIMES
2
1
0
h 01 00 m s 001
24
23
END CANCEL
START WAITING TIME
2
1
0
h 00 m LATER
24
23
ESTIMATED START TIME 11:00 PM
START CANCEL
65