Speedboost Function - Bosch NITP666SUC Use And Care Manual

As a conventional burner
By default, the flexible cooking zone can be used as a
single burner.
Activate this function
The cooktop must be turned on.
1. Select the flexible cooking zone with the symbols _ or
• I'_ I'_
La.Lalights up in the element display.
2. Set the desired power level with the number keys.
The flexible cooking zone is activated.
Changing the heat setting
Change the heat setting on the control panel.
Add another piece of cookware
Select the flexible cooking zone and touch the
Flex ON symbol. The element will detect the new piece of
cookware.
The previously set power level will be maintained.
Note: When you lift or remove cookware from an
activated element the element will automatically try to
detect the cookware. The previously set power level is
maintained.
Turning off this function
Select the cooking zone and touch the Flex OFF symbol.
As two burners
The flexible cooking zone can be used as two
independent burners.
Activating this function
1. Select the flexible cooking zone and touch the Flex
OFF symbol. The indicator -- lights up between the C-
and _" symbols.
2. Select one of the flexible cooking zones. La.Lalights up
in the element display.
3. Set the power level with the number keys.
The function is switched off by:
selecting the burner and pressing the 0 symbol. The
burner switches off.
Note: tf the cooktop is switched off and on again, the
flexible cooking zone is switched to operation as a single
burner again.
SpeedBoost function
The SpeedBoost function can be used to heat lar.ge
amounts of water faster than by using heat level SI.
Limitation on use
This function is available on all elements, provided that
no other element in the same group is operating, (see
picture), tf this is not the case, the b and _ symbols will
flash on the selected element display; then it will
automatically set the power level _.
Group Group 3
Group 2
Note: You can achieve maximum power on the flexible
cooking zone by placing just one piece of cookware in
the middle of the cooking zone as described in the
Flexible Cooking Zone chapter.
Setting SpeedBoost
1. Select an element.
2. Touch Speed Boost. The function is set.
Turning SpeedBoost off
1. Select an element on which SpeedBoost is set.
2. Touch Speed Boost. The function is deactivated.
Note: In certain circumstances, the function may be
deactivated automatically to protect the internal
electronic components of the cooktop.
13