Table of Contents
Advertisement
Available languages
Available languages
When the time has elapsed
An audible signal sounds once the time has elapsed.
and the
symbol flash in the timer display.
V
The indicators go out after touching the kitchen timer
key.
Count Up Timer
The count up timer function displays the time that has
elapsed since activation.
This functions independently from the cooking zones and
from other settings. This function does not automatically
switch off a cooking zone.
Activating
Touch the count up timer key. The
indicator light up in the timer display.
V
The time begins to count up.
Deactivating
Touching the count up timer key turns off the stopwatch
function. The timer displays remain lit.
If you touch the count up timer key again, the displays
go out.
The function is deactivated.
SpeedBoost
function
®
The SpeedBoost
function enables you to heat up large
®
quantities of water faster than when using heat setting
This function can be activated for a cooking zone at any
time, provided the other cooking zone in the same group
is not in use (see illustration).
Activating
Select a cooking zone.
1.
Touch the speed boost key.
2.
The
. indicator lights up.
›
The function is activated.
Deactivating
Select a cooking zone.
1.
Touch the speed boost key.
2.
The
. display goes out and the cooking zone
›
switches back to power level
The function is deactivated.
Note: In certain circumstances, the SpeedBoost
function can switch itself off automatically in order to
protect the electronic elements inside the cooktop.
14
‹‹
symbol and the
‹‹
Š
.
Š
®
ShortBoost function
The ShortBoost function enables you to heat cookware
faster than when using heat setting
After deactivating the function, select the appropriate
heat setting for your food.
This function can be activated for a cooking zone at any
time, provided the other cooking zone in the same group
is not in use (see illustration).
Recommendations for use
Always use cookware that has not been pre-heated.
▯
Use pots and pans with a flat base. Do not use
▯
containers with a thin base.
Never leave empty cookware, oil, butter or lard to heat
▯
up unattended.
Do not place a lid on the cookware.
▯
Place the cookware on the center of the element.
▯
Ensure that the diameter of the base of the cookware
.
corresponds to the size of the element.
You can find information on the type, size and
▯
positioning of the cookware in section ~ "Cooking
with Induction"
Activating
Select a cooking zone.
1.
Touch the speed boost key twice.
2.
The
˜›Ú
indicator lights up.
The function is activated.
Deactivating
Select a cooking zone.
1.
Touch the speed boost key.
2.
The
˜›Ú
display goes out and the cooking zone
switches back to power level
The function is deactivated.
Note: After 30 seconds, this function will automatically
switch off.
.
Š
.
Š
Advertisement
Chapters
Table of Contents
