Vivitar DVR 794SHD User Manual page 20

selected resolution) is shown on the top right of the LCD screen.
2. Changing Resolution:
If you would like to change the resolution, press the MENU button and then press the
DOWN (WI-FI) button to select 'Resolution'. Next, press the SHUTTER/OK button to view
the Resolution options. Press the  DOWN (WI-FI) button to select and highlight an option
and then press the SHUTTER/OK button to confirm the option.
The Resolution options include:
 1080P - 1080P (30fps)
 720P -
720P (60fps)
 720P -
720P (30fps)
3. Capturing the Video:

START: Press the SHUTTER/OK button to start the video capture.
The camcorder's LED busy light turns on and blinks. All icons disappear and the
elapsed time and date appear on the top of the LCD screen along with a blinking icon
REC
that indicates the recording is in progress.

STOP: Press the SHUTTER/OK button again to stop the video recording.
4. The video is automatically saved to the camcorder's Micro SD Memory card.
NOTE:
 While capturing your video, after approximately one minute of video capture, the LCD display
turns off in order to save power. The busy LED light remains on and the video continues to be
captured. Press the Shutter, Menu or Wi-Fi button to reactivate the LCD display.
 After recording the video, the updated amount of available time left to capture additional
videos as per your memory card size and selected resolution size appears on the LCD screen.
 If the memory card is full or the battery level is low, the camera will automatically stop
recording the video
 When using the Waterproof Case, make sure to set camcorder settings before placing it into
the case.
19
