Ec Declaration Of Conformity - Husqvarna 536LiPX Operator's Manual

Guide bar and saw chain combinations
The following cutting attachments are approved for the model Husqvarna 536LiPX. Use only the A318 bar for the
536LiPX.
The following combinations are CE approved.
Guide bar
Length, inch
10
12
Saw chain filing and file gauges
EC Declaration of Conformity (Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500 declares that the battery-operated chain clearing
saw Husqvarna 536LiPX with serial numbers dating 2016 and onwards (the year is clearly stated on the rating plate,
followed by the serial number) comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
- of June 8, 2011 on the "restriction of use of certain hazardous substances" 2011/65/EU.
The following standards have been applied:
EN ISO 22868:2011, EN ISO 22867:2011, EN 60335-2-29, EN 62133:2011, EN 60745-1
SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC type examination in
accordance with the machinery directive's (2006/42/EC) article 12, point 3b.
SP, Box 857, SE-501 15 Borås, Sweden has issued a voluntary type approval for Husqvarna AB
Huskvarna January 10, 2017
Lars Roos, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
TECHNICAL DATA
Pitch, inch Gauge, mm
3/8 1,3
3/8 1,3
Saw chain
Length, drive links
Type
(no.)
Husqvarna H37 (low
40
kick)
Husqvarna H37
44
(mini)
English – 31