Table of Contents
Advertisement
VIVOTEK
To start a module, select the checkcircle in front, and click the Start button.
If you should need to remove a module, select the checkcircle in front and then click the
Stop button. By then the module status will become OFF, and the X button will appear at
the end of the row. Click on the X button to remove an existing module.
When prompted by a confirm message, Click Yes to proceed.
No
Yes
Note that the actual memory consumed while operating the module will be indicated on the
Memory status field. This helps determine whether a running module has consumed too
much of system resources.
User's Manual - 127
Advertisement
Table of Contents
