Grundig DKR 700 DAB+ Manual page 20

SETTINGS
Programming­FM­radio­stations­–­
manually
1
To select FM radio as input source, press
»MODE­­SCAN­­ALARM« for a short time.
– Display: »FM«, then the name or the frequen-
cy of the FM radio station.
2 Open the menu with »MENU«.
3 Select the option »TUNE« with »+­VOL.­-« and
press »SELECT/INFO« to confirm.
4
Press and hold down »+­VOL.« or »VOL.­-« to
search the desired radio station.
– The automatic station search starts, and stops
at the next station with a strong signal;
or
briefly pressing »+­
you have found the frequency you want.
– The frequency changes in steps of 50 kHz.
5 To store the FM radio station on a preset, press
and hold down the required preset buttons »1«
to »5«, until »STORED« appears.
Press »+5« and the required preset buttons »1«
to »5« change for presets 6 to 10.
Note:­
The device normally scans for FM radio sta-
7
tions which are strong enough to get good
reception. To scan radio stations with weak
signal:
Open the menu with »MENU«, select the
option »SCAN« with
»SELECT/INFO« to confirm.
Select the option »DX« with »+­VOL.­-« and
press »SELECT/INFO« to confirm.
Repeat the setting from point 2.
20­ ­ ENGLISH
­ - --------------------------------------------------------------------------------------------------------------------------------------
VOL.« or »VOL.­ -« until
»+­ VOL.­ -« and press
Setting­the­clock­format­
(12­or­24­hours)
1
Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 AKT«.
2 Open the menu with »MENU«.
3 Select the option »SYSTEM« with »+­VOL.­-«
and press »SELECT/INFO« to confirm.
4
Select the option »TIME« with »+­VOL.­-« and
press »SELECT/INFO« to confirm.
– Display: »SET TIME«.
5 Select the option »12/24 HR« with »+­VOL.­-«
and press »SELECT/INFO« to confirm.
– Display: »24«.
6 Select the desired clock format (12 or 24
hours) with »+­VOL.­-«.
7 Press »SELECT/INFO« to confirm the setting.
8
Press »MENU« to end the setting.