Vivotek TB53B6 SERIES User Manual page 275

7.38 camera PTZ control
Group: camctrl (capability.camctrl.ptztunnel > 0)
NAME
enableptztunnel
Group: camctrl_c<0~(n-1)> for n channel products
n denotes the value of "capability_nvideoin"
NAME
panspeed
tiltspeed
zoomspeed
focusspeed
patrolseq
patroldwelling
preset_i<0~(capability_n
preset -1)>_name
preset_i<0~(capability_n
preset -1)>_ dwelling
uart
cameraid
isptz
disablemdonptz
VALUE SECURITY
(get/set)
<boolean> 1/4
VALUE SECURITY
(get/set)
-5 ~ 5 1/4
-5 ~ 5 1/4
-5 ~ 5 1/4
-5 ~ 5 1/4
string[120] 1/4
string[160] 1/4
string[40] 1/4
0 ~ 999 1/4
0 ~ 1/4
(capability_nuart -1)
0~255 1/4
0 ~ 2 1/4
<boolean> 1/4
DESCRIPTION
Enable PTZ tunnel for camera control.
(capability.ptzenabled > 0)
DESCRIPTION
Pan speed
Tilt speed
Zoom speed
Auto focus speed
(For external device)
The indexes of patrol points, separated by ","
(For external device)
The dwelling time of each patrol point,
separated by ","
Name of the preset location.
The dwelling time of each preset location
Select corresponding uart
(capability.nuart>0).
Camera ID controlling external PTZ camera.
0: disable PTZ commands.
1: enable PTZ commands with PTZ driver.
2: enable PTZ commands with UART tunnel.
* Only available when bit7 of
capability_ptzenabled is 1
Disable motion detection on PTZ operation.
VIVOTEK
User's Manual - 275