Panasonic LUMIX DMC-GX80 Operating Instruction page 224

9. Using Menu Functions
>
[Setup]
MENU
[TV Connection]
[Video Out]:
Set to match the colour television system in each
country
when the HDMI micro cable is connected.
[NTSC]:
Video output is set to NTSC system.
[PAL]:
Video output is set to PAL system.
[HDMI Mode (Play)]:
Set the format for the HDMI output when playing back on
the HDMI compatible high-definition TV connected with
this unit using the HDMI micro cable.
[AUTO]:
The output resolution is automatically set based on
the information from the connected TV.
[4K]:
The progressive method with 2160 available scan
lines and an output resolution of 3840k2160 are
used for output.
[1080p]:
The progressive method with 1080 available scan
lines is used for output.
[1080i]:
The interlace method with 1080 available scan lines
is used for output.
[720p]:
The progressive method with 720 available scan
lines is used for output.
[576p] ¢1 /[480p] ¢2
The progressive method with 576
scan lines is used for output.
¢1 When [Video Out] is set to [PAL]
¢2 When [Video Out] is set to [NTSC]
•
This will work only during playback.
•
If no image appears on the TV with [AUTO], switch the
setting to a constant setting other than [AUTO] to set a
format supported by your TV. (Read the operating
instructions for the TV.)
224
:
¢1 /480
P292
¢2 available