Using The Vacuum - Shark NV22QUK Owner's Manual

Using the Vacuum

OFF
1
Your Shark Navigator Upright
®
Vacuum is a versatile tool that
can be used to clean bare floor
surfaces or carpets – with the click
of a switch.
Stand the vacuum into the upright
position.
Plug in the vacuum.
1
Start with the Power Switch in
the "O Off" position.
2
Place your foot on the Floor
Power Nozzle and pull handle
towards you.
3
Set the Power Switch to desired
cleaning setting.
6
TOLL FREE: 0800 51 41 31
Bare Floors / Tools
4
Indicator Light
4 When cleaning bare floors:
Select the "I On" position for
suction only cleaning to avoid
scattering dirt while cleaning.
When cleaning carpets:
Ensure you have pulled the
handle towards you and select
the "II Brush Roll On" position
to agitate the carpet fibers for
deeper cleaning performance.
Carpets
IMPORTANT:
To protect your carpets, the
Brush Roll will only turn on when
you have pulled the handle back
towards you and released the
Floor Power Nozzle.
IMPORTANT:
Your Brush Roll Indicator Light
will illuminate solid green when
brush roll is on, or solid red if
there is a blockage. This feature
is designed to protect your
Lifetime Belt that powers your
Brush Roll. See Checking for
Blockages on page 11.
NOTE: The height of your power
nozzle has been optimized for
easy pushing and superior clean-
ing on all floor types, so there
is no need to make any height
adjustments as you transition to
different floor & carpet types.