Care Of Your Steam Mop - Shark S3502 Series Owner's Manual

Care of Your Steam Mop

AFTER USE AND STORAGE
1
When you have finished using the steam mop, and
your floors are clean, unplug the cord from the outlet
and move it into an upright position. Let the unit
cool 2-3 minutes and release steam by pumping the
handle several times before removing the cleaning
pocket from the mop head.
2
2
Remove the cleaning pocket by releasing the quick
fasteners and using the lavender loop on the side of
the pocket, avoiding contact with the hot pocket or
dirt. Then empty the water tank.
IMPORTANT: Be very careful because the cleaning
pockets can get very hot from the steam, so use
caution when removing them. Let the unit cool 2-3
minutes.
8 TOLL FREE: 1-800-798-7398
3
3
To store the Shark Steam Mop hanging up; first
®
remove the head (after it has cooled and the steam
has been released) then hang on a large hook.
NOTE: If you want to store it standing upright then
make sure it's leaning against a wall for added
support and safety. Always store your Steam Mop
with the cleaning pocket removed, away from
children or high traffic areas.