Setting The Timer; Vent Fan Hi / Low / Off; Surface Light / On / Off; Turntable On / Off - Bosch HMV5051U Use And Care Manual

Setting the timer

Vent Fan Hi / Low / Off

Surface Light / On / Off

Turntable On / Off

Control Lock

16
Example: setting timer for 5 minutes:
1. Touch Timer pad once.
2. Enter desired time using number pads.
3. Touch Timer pad.
When the timer has reached the end of set time, ©”” appears in the display and
you will hear permanent beep alerts indicating the timer has run out.
To stop the beep, touch Timer or STOP pad.
The exhaust ventilation moves steam and other cooking vapors from the cooking
surface of the range below the microwave oven.
To operate the exhaust vent, touch the Vent Fan Hi/Low/Off pad once for the
highest speed setting. Touch the pad again to choose the Low speed setting and a
3rd time to turn ventilation off.
Note: If the temperature gets too hot around the microwave oven, the fan in the
exhaust vent hood will automatically turn on at the LOW setting to cool the oven.
The fan will automatically turn off when the internal parts are cool. When this occurs,
the vent cannot be turned off.
Touch the Surface Light/On/Off pad once for a cooking surface light. Press the
pad again to turn the light off.
The Turntable On/Off feature can only be set while the microwave has been started.
For best cooking results, leave the turntable on. It can be turned off for large dishes.
To turn the turntable off, touch the Turntable On/Off pad once. Press the pad
again to turn the turntable on.
Note: Sometimes the turntable can become hot. Be careful touching the turntable
during and after cooking. Do not run the oven empty.
You may lock the control panel to prevent the microwave from being accidentally
started or used by children.
The control lock feature is very useful when cleaning the control panel. The lock will
prevent accidental programming when wiping the control panel clean.
Example: to set the control lock ON:
Touch and hold the Stop/Cancel pad for more than 3 seconds. The Lock icon will
appear in the display window along with 2 beeps.
Example: to change the control lock from ON to OFF:
Touch and hold the Stop/Cancel pad for more than 5 seconds. The Lock icon will
disappear in the display window.