Asus Trooper B150 D3 User Manual page 46

BIOS menu screen
The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from the Exit menu or from the Exit/Advanced Mode button in the EZ
Mode/Advanced Mode screen.
EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode or press <F7> for
the advanced BIOS settings.
The default screen for entering the BIOS setup program can be changed.
Displays the CPU temperature,
DRAM information, CPU voltage
output, and CPU/chassis fan speed
SATA
information
•
•
2‑8
Selects the display language
of the BIOS setup program
Fan profile
The boot device options vary depending on the devices you installed to the system.
The Boot Menu(F8) button is available only when the boot device is installed to the
system.
Loads Exits the BIOS setup program without
optimized saving the changes, saves the changes
default and resets the system, or enters the
Advanced Mode
Displays the system
properties of the
selected mode on the
right hand side
Selects the boot
device priority
Chapter 2: BIOS Information