Asus Trooper B150 D3 User Manual page 29

• Due to USB 3.0 controller limitations, USB 3.0 devices can only be used under a
Windows
• The plugged USB 3.0 device may run on xHCI or EHCI mode, depending on the
operating system's setting.
• USB 3.0 devices can only be used for data storage.
• We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance from your USB 3.0 devices.
*LAN port LED indications
Activity/Link LED
Status Description
Off No link
Orange Linked
Orange (Blinking) Data activity
Orange (Blinking Ready to wake up
then steady) from S5 mode
**Audio 2.1, 4.1, 5.1 or 7.1-channel configuration
Port
Light Blue
(Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
For an 8-channel speaker setup, refer to the 7.1-channel configuration in the table.
ASUS TROOPER B150 D3
OS environment and after USB 3.0 driver installation.
®
Speed LED
Status
OFF
ORANGE
GREEN
Headset
4.1-channel
2.1-channel
Line In Rear Speaker Out
Line Out Front Speaker Out
Mic In Mic In
—
Description
10Mbps connection
100Mbps connection
1Gbps connection
5.1-channel
Rear Speaker Out
Front Speaker Out
Bass/Center
— —
Speed
Activity Link
LED
LED
LAN port
7.1-channel
Rear Speaker Out
Front Speaker Out
Bass/Center
Side Speaker Out
1-21