Crown Interface 3 Specifications

IQ-INT 3
T
he Crown IQ-INT 3 is an IQ System
®
interface that connects up to four different
IQ Bus loops to a host computer. It is
a self-contained unit with its own IQ Bus driv-
ers, RS232 drivers and power supply. It has a
microprocessor that can be directed by the host
computer to send and receive commands and
data to and from IQ components connected to
its IQ Bus loops.
The IQ-INT 3 supports both the original IQ
and the newer IQ (Ucode) protocols. Conve-
2
nient RJ-45 connectors for IQ Bus input and
output make it easy to make system connec-
tions, allowing the use of off-the-shelf straight-
through network cables. Plus, the interface is
backed by Crown's unequaled Three-Year, No-
Fault, Full Warranty that covers everything.
For more details about the Crown IQ-INT 3,
contact the Crown Technical Support Group at
800-342-6939 or 219-294-8200. Also, visit the
Crown Audio website at www.crownaudio.com.

Specifications

General
Internal Controls: A four-segment DIP switch
located on the rear panel is used to configure
the data rate for communication with the host
computer.
Connectors: IQ Bus Input: Four RJ-45 connec-
tors. IQ Bus Output: Four RJ-45 connectors.
(The IQ Bus Input and Output connectors are
grouped in pairs to accommodate four different
loops.) Computer: Female 9-pin "D-shell" con-
nector. AC Power: IEC320 connector for AC
power cord. All connectors are located on the
rear panel.
Indicators: A blue front and rear panel Power
indicator shows that the unit is plugged in and
receiving power. Yellow front and rear panel
I N T E R F A C E
®
Features
• Connects up to four separate IQ Bus loops.
• Blue Power indicators on the front and rear
panels.
• Yellow Loop Status indicators on the front and
rear panels show IQ Bus loop data activity.
indicators for each IQ Loop show loop data
activity.
Power Supply: Universal input switching power
supply.
Power Requirements: 100VAC to 240VAC, 47
Hz to 66 Hz.
Power Consumption:
60 Hz
100VAC 3.70W
120VAC 3.92W
220VAC 5.03W
230VAC 5.23W
240VAC 5.59W
Crown Bus Data Communication
Protection: The auto-reset feature is controlled
by the microprocessor. Optically coupled
20-milliamp current loop receivers provide
ground isolation.
Data Rate: 38.4 K baud.
Data Format: Asynchronous binary serial data
with 1 start bit, 1 stop bit, 8 data bits and no
parity check.
Interface Type: 20-milliamp current loop.
Operation: Half duplex.
Intelligence: 16-bit microprocessor.
Transmission Distance: Variable from 200 to
• RJ-45 connectors for IQ Bus input and output
• Supports both the original IQ and newer IQ
• The best three-year "No-Fault" full warranty
3,000 feet (61 to 914 meters) depending on
wire capacitance. 1,000 feet (305 meters) is
typical with shielded 26 AWG twisted pair wire.
IQ repeaters or fiber optic transceivers can be
used to cover greater distances.
Host Computer Data Communication
Data Rate: 9,600, 19,200, 38,400, 57,600 or
115,200 baud.
50 Hz
Data Format: Asynchronous binary serial data
3.71W
with 1 start bit, 1 stop bit, 8 data bits and no
3.92W
parity check.
5.03W
Interface Type: RS232.
5.18W
5.41W
Operation: Half duplex.
Data Buffer: 255 bytes.
Intelligence: 16-bit microprocessor.
RS232 Transmission Distance: 50 feet (15.2
m).
Mechanical
Finish: Charcoal powder-coated steel chassis
and front panel with Lexan
lays.
Dimensions: 19-inch (48.3 cm) standard rack
mount width (EIA RS-310-B), 1.75-inch (4.4
cm) height and 6.5-inch (16.5 cm) depth.
Weight: 6 lbs., 4 oz (2.8 kg) net; 9 lbs., 5 oz
(4.2 kg) shipping.
for easy and secure IQ Bus connections.
protocols.
in the business!
® front and rear over-
2