LG DLEX9000 Owner's Manual page 49

Before Calling for Service (cont.)
Steam does not
generate but
no error code is
shown
Garments still
wrinkled after of garments in dryer.
STEAM FRESH™
There are no
creases left on remove wrinkles from fabric.
garment after
STEAM FRESH™
Water drips from
door during
Steam Cycle
Steam is not
visible during
Steam Cycle
Drum does not
turn during
Steam Cycle
Cannot see
steam vapor at
the beginning of
cycle
The display
shows
Odors remain
in clothing after odor completely.
STEAM FRESH™
light is on during full.
the drying cycle
TM
FLOW SENSE
many turns/restrictions.
indicator shows
four bars during
the drying cycle
ductwork due to lint buildup or
or the display
debris.
shows "d80" after
drying.
restriction in the external dryer
venting.
dryer door during steam operation. Some condensation
may drip out the bottom of the door.
However, condensation will normally form on the
inside of the dryer door if the steam system is operating
normally.
in the drum. The drum will normally turn for about 2
seconds once a minute.
option.
for a " " item such as a comforter.
Press the LESS TIME button to reduce the indicated load
size.
normal cycle.
Instructions.
Dryer can be used in this condition, but drying times may
be longer.
system, the indicator will remain on for two hours after
the end of the cycle. Opening the door or pressing the
Power button will turn off the display.
TROUBLESHOOTING
TM
49