Placing A Second Call; Answering Calls - Cisco SPA525G2 Owner's Manual

1. Press
2. Dial the desired number using the dial pad.

Placing a second call

While on a call, you may place that call on hold and make a second
call. There are two ways to place another call:
Method 1
1.
Pressing a line button on the right of the display, will place the first call
on hold AND at the same time give a dial tone to make a second call
2.
Dial the 10-digit phone number or 3-digit extension number
3.
Press the dial soft key
Method 2
1.
Press the Hold button or Hold option on the display. This will place
your caller on hold.
2.
Press an additional line button on the right of the display.
3.
Dial the phone number or 3-digit extension number and press the dial
soft key. You will be connected to that party
4.
You may switch between calls by using the line button on the right of
the display.

Answering Calls

There are a few methods to answer a call, similar to those of placing a call.
• using the handset
• using the speakerphone
• using the headset
To answer a call using the handset:
Pick up the handset.
To answer a call using Hands-Free Speakerphone mode:
15