Field Settings; Procedure - Daikin EKHBRD011ADV17 Operation Manuals

Field settings

The configuration of the Daikin system is done through field settings.
In this operation manual all field settings related to the operation of
the unit and user demand are explained. A list of all those field
settings and default values is given under
page 17. In this same list, we provided for 2 columns to register the
date and value of altered field settings at variance with the default
value.
For a total list of field settings, refer to the installation manual.
All field settings are accessible and programmable through the user
interface on the indoor unit.
Each field setting is assigned a 3-digit number or code, for example
[5-03], which is indicated on the user interface display. The first digit
[5] indicates the 'first code' or field setting group. The second and
third digit [03] together indicate the 'second code'.

Procedure

To change one or more field settings, proceed as follows.
3
2
1 Press the button for a minimum of 5 seconds to enter FIELD
SET MODE.
The icon (3) will be displayed. The current selected field
setting code is indicated
the right (1).
2 Press the button to select the appropriate field setting
first code.
3 Press the button to select the appropriate field setting
second code.
4 Press the button and
the set value of the select field setting.
5 Save the new value by pressing the
6 Repeat step 2 through 4 to change other field settings as
required.
7 When finished, press the
NOTE Changes made to a specific field setting are only
stored when the
new field setting code or pressing the
discard the change made.
I
NOTE Before shipping, the set values have been set as
shown under
I
When exiting FIELD SET MODE, "88" may be
displayed on the remote controller LCD while the
unit initializes itself.
EKHBRD011~016ADV17+Y17
Indoor unit for air to water heat pump system and options
4P402192-1B – 2017.09
"Field settings table" on
(2), with the set value displayed to
button to change
button.
button to exit FIELD SET MODE.
button is pressed. Navigating to a
button will
"Field settings table" on page
When running through the field settings you may notice
that there are some more field settings as there are
mentioned in the
field settings are not applicable and may not be
changed!
1
17.
"Field settings table" on page
Operation manual
17. These
16