Table of Contents
Advertisement
TV Menu Operation
PICTURE MENU
To access this menu, press [MENU] button on the remote control.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Picture Mode
- Choose from the following presets:
Dynamic
Recommended settings for fast moving pictures
Standard
Standard settings
Mild
Set to be lighter in colour and less bright
Personal
Lets you manually alter all the settings
Economy
Power saving mode which reduces the energy used by up to 25% (by reducing the
power to the LED/LCD panel). In Economy mode, the TV will switch itself to
Standby mode after 3-5 hours in the event that the TV buttons or remote control
buttons are not pressed (change the picture mode to another setting to de-activate
this function)
You can make the following adjustments in
•
Contrast
- Switch the balance between black and white.
•
Brightness
- Increase or decrease the brightness of the picture.
• Colour
- Increases the colour from black and white.
• Tint
- Lets you increase or decrease the level of tint within the picture
(only available for NTSC input signal).
• Sharpness
- Increase or decrease the sharpness of the picture.
Colour Temperature
Choose from the following presets:
Normal
Default settings
Warm
Increases red within the picture
Cold
Increases blue within the picture
Personal
mode:
buttons.
17
17
Advertisement
Table of Contents
