Loading Interval Presets - Epson SF-510 User Manual

The Interval screen is displayed.
Measuring intervals
1
Press C to start the sprint interval.
When the sprint time or sprint distance has
passed, an alarm sounds and the recovery
interval starts automatically.
This will continue based on the number of
interval repeats that you have selected.
Note:
O Press D while measuring to switch between
sprint and recovery intervals.
O To stop measuring, press C. Press C again to
resume measuring.
2
The product automatically stops measuring
after you have completed the set number of
interval repeats.
Measuring your workouts
When you finish, the time, distance, and calories
burnt are displayed.
3
Hold down D while measuring is stopped to
reset the measurement results. Data measured
up to that point is stored in the product's
memory. You can check this data by pressing D
on the Time screen.

Loading interval presets

Loading interval presets
1
Press C on the Time screen to display the
Measurement screen.
GPS positioning starts, and the Measurement
screen is displayed once positioning is complete.
35
See "Viewing past workouts" on page 48.