Setting The Presentation Timer - ViewSonic PJD7830HDL User Manual

Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations. Follow these steps to
utilize this function:
1. Press Timer on the remote control to access the
Presentation Timer menu or go to the SYSTEM
SETTING: BASIC > Advanced > Presentation Timer
menu and press Enter to display the Presentation
Timer page.
2. Highlight Timer Period and decide the timer period by
pressing / .
3. Press to highlight Timer Display and choose if you
want the timer to show up on the screen by pressing
Selection
Always
1 min/2 min/3 min
Never
4. Press to highlight Timer Position and set the timer position by pressing
Top-Left → Bottom-Left → Top-Right → Bottom-Right
5. Press to highlight Timer Counting Direction and select your desired counting
direction by pressing
Selection
Count Up
Count Down
6. Press to highlight Sound Reminder and select your desired counting direction
by pressing / . If you select On, a double beep sound will be heard at the last
30 seconds of counting down/up, and a triple beep sound will be produced when
the timer is up.
7. To activate the presentation timer, press
Yes.
8. To cancel the timer, highlight Start Counting and select No.
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 1/2/3 minute(s).
Hides the timer throughout the presentation time.
/ .
.
Description
Increases from 0 to the preset time.
Decrease from the preset time to 0.
25
/ .
to highlight Start Counting and select
/
.