Model Nomenclature - Bosch LV Series Installation And Maintenance Manual

LV Heat Pump Series

MODEL NOMENCLATURE

SERIES
LV
SIZE
007
009
012
015
018
024
030
036
041
042
048
060
070
VOLTAGE
0 115/60/1
1 208-230/60/1
2 277/60/1
3 208-230/60/3
4 460/60/3
5 575/60/3
CABINET CONFIGURATION
HZ - Horizontal
VT - Vertical
CF - Downflow (Counterflow)
SAFETY CONSIDERATIONS
Installation and servicing of this equipment
can be hazardous due to system pressure
and electrical components. Only trained
and qualified personnel should install,
repair, or service the equipment.
Before performing service or maintenance
operations on the system, turn off main
power to the unit. Electrical shock could
cause personal injury or death.
When working on equipment, always
observe precautions described in the
literature, tags, and labels attached to the
unit. Follow all safety codes. Wear safety
glasses and work gloves. Use a quenching
cloth for brazing, and place a fire
extinguisher close to the work area.
To avoid the release of refrigerant into the
atmosphere, the refrigerant circuit of this
unit must be serviced only by technicians
who meet local, state, and federal
proficiency requirements.
LV Heat Pump Series
LV 018 - 1 VT C - F L T - P A
Model Nomenclature | 3
R R R REVISION LEVEL
A - Current
F FAN/MOTOR OPTIONS F
P - Standard PSC
A - Constant Airflow ECM
T - Constant Torque ECM
D DSICHARGE AIR CONFIGURATION D
T - Top
S - Straight
E - End
B - Bottom
R RETURN AIR CONFIGURATION R
L - Left
R - Right
W WATER CONNECTIONS
F - Front
COAX OPTIONS C
C - Copper
N - Cupro-Nickel
All refrigerant discharged from this unit
must be recovered WITHOUT EXCEPTION.
Technicians must follow industry accepted
guidelines and all local, state, and federal
statutes for the recovery and disposal of
refrigerants. If a compressor is removed
from this unit, refrigerant circuit oil will
remain in the compressor. To avoid leakage
of compressor oil, refrigerant lines of the
compressor must be sealed after it is
removed.
To avoid equipment damage, DO NOT use
these units as a source of heating or cooling
during the construction process. Doing so
may affect the unit's warranty. The
mechanical components and filters will
quickly become clogged with construction
dirt and debris, which may cause system
damage.
8 733 905 683 (2013/04)