Identification Data; Technical Specifications - Bajaj Pulsar 180 CC DTS-i Owner's Manual

Identification Data

The Frame and Engine serial numbers are used to register the motorcycle. They are the unique
alpha-numeric codes to identify your particular vehicle from others of the same model and type.
Engine Number Location
On LH Side Crankcase
Near Gear Change Lever
(Alpha-Numeric - 11 Digits)
Frame Number Location
On LH Side of Steering Tube
(Alpha-Numeric - 17 Digits)
1

Technical Specifications

Engine : 4 stroke, Single Cyl., Natural air
cooled.
Bore x Stroke : 63.50 x 56.40
Engine Displacement : 178.60 cc
Compression Ratio : 9.5 + 0.5 : 1
Max. Net Power : 17.02Ps (12.52Kw) @ 8500 rpm
Max. Net Torque : 14.22 Nm at 6500rpm
Ignition System : Microprocessor controlled digital CDI
Spark Plug : Champion RG 4 HC. 2 Nos.
Spark Plug Gap : 0.6 to 0.8 mm
Lubrication : Wet sump, Force.
Transmission : 5 speed constant mesh.
Front Brake : Hydraulic disc type.
Rear Brake : Mech. expanding shoe & drum type.
Fuel Tank Capacity :
Full : 15 litres
Reserve : 3.2 litres
Usable Reserve : 2.0 litres
Dimensions :
Length : 2035 mm
Width : 750 mm
Height : 1165 mm
Wheel base : 1350 mm
Min. Turning radius : 2500 mm (Min.)
Ground clearance : 165 mm (Min.)
Tyre Size
Front : 90 x90x 17", 49P
Rear : 120/80 x 17", 61P
Tyre Pressure
Front : 2.00 kg/cm2 (28.4 PSI)
Rear (Solo) : 2.00 kg/cm2 (28.4 PSI)
Rear (Pillion) : 2.15 kg/cm2 (32.5 PSI)
Electrical System : 12 Volts DC
Head Lamp : 35/35 W-HS1
Pilot Lamp : 5 W Each 2 Nos.
Tail /Stop Lamp : LED/LED
Turn Signal Lamp : 10 W (2 Nos.)
Neutral Indicator Lamp : LED
Hi Beam Indicator Lamp : LED
Turn Pilot Indicator Lamp : LED
Side Stand Indi. Lamp : LED
Speedometer Lamp : LED Display
Rear No. Plate Lamp : 5 W
Horn : 12 V DC
Battery : 12V - 9 Ah MF
Vehicle Kerb Weight : 147 kg.
Gross Vehicle Weight : 280 kg.
0
Climbing Ability : 28% (16 max)
Note : All dimensions are under UNLADEN condition. Above
information is subject to change without any notice.
2