Table of Contents
Advertisement
Problem
Solution
Good sound,
• Adjust the contrast, color, and
but poor color.
brightness settings. See
the TV picture
Audio noise.
• Other devices (for example, a
surround sound receiver, external
speakers, fans, or hair dryers) may
be interfering with your TV. Try
turning off one device at a time to
determine which device is causing
interference. After you have
determined which device is causing
interference, move it further from
the TV to eliminate the interference.
No output from
• Adjust the audio balance. See
one of the
Adjusting sound settings
speakers.
page 46.
• Test the TV's speakers. See
the TV speakers
or both of the speakers fails, try one
of the following solutions:
• Make sure that the audio cables
• Make sure that the audio cables
• Try a different set of audio cables.
• Make sure that the sound on the
• Try connecting the device to a
After images
• Do not display a still image, such as
appear.
a logo, game, or computer image,
for an extended period of time. This
can cause a permanent after-image
to be burned into the screen. This
type of damage is not covered by
your warranty.
Adjusting
on page 44.
on
Testing
on page 65. If one
are connected correctly and
securely to your TV.
are connected to the AUDIO OUT
jacks on the connected device.
connected device is not muted.
different TV. If you do not hear
sound, the problem is with the
device.
www.insigniaproducts.com
Remote control
Problem
Solution
Remote
• Make sure that the power cord is
control does
plugged into a working outlet.
not work.
• Make sure that there are no
obstructions between the remote
control and the remote control sensor
on the front of the TV.
• Point the remote control directly at
the remote control sensor on your TV.
See
page 31.
• The supplied batteries are wrapped
tightly in clear plastic. Make sure that
you have removed this plastic from
the batteries.
• Make sure that the batteries are
installed correctly. See
remote control batteries
• Replace dead batteries with new
batteries. See
control batteries
Trouble
• See instructions in
programming
universal remote controls
your existing
• Codes are subject to change. For
universal
up-to-date codes, go to
remote
Viewing universal remote control
control.
codes
www.insigniaproducts.com/remotecodes
• Replace dead batteries with new
batteries.
• Refer to the User Guide that
accompanied your universal remote
control and contact the manufacturer
if problems persist.
General
Problem
Solution
No power.
• Make sure that the power cord is
plugged into a working outlet.
• Unplug the power cord, wait 60
seconds, then plug the cord back in
and turn on your TV.
• Other devices (for example, a
surround sound receiver, external
speakers, fans, or hair dryers) may be
interfering with your TV. Try turning
off one device at a time to determine
which device is causing interference.
After you have determined which
device is causing interference, move it
further from the TV to eliminate the
interference.
"No signal"
• Press INPUT and make sure that you
error message
have selected the correct input for the
is displayed.
device or service you are trying to use.
• If you are using a cable or satellite
box, use the remote that came with
that box to change channels.
22" 1080p 60Hz LED TV
Aiming the remote control
Installing
on page 31.
Installing remote
on page 31.
Programming
on page 32.
on page
32
or visit
on
69
Advertisement
Table of Contents
