Using Camera Access Point Mode to Establish a Connection
Operation on the Camera-2
The device name set on
Camera Connect
Operation on the Smartphone-2
The settings for communicating with a smartphone are now complete.
To register multiple connection settings, see page 92.
You can check or change the device name on the setting screen of
Camera Connect.
34
Connect to the camera.
8
When a connection is established,
the screen on the left will appear on
the camera's LCD monitor.
To specify viewable images, press the
<B> button. See step 5 on page
90 to set them.
Press the <Z> key to select [OK],
then press <0>.
The camera's <k> lamp will light up
in blue.
After a message is displayed, the
camera's LCD monitor will turn off.
Operate the camera using
9
Camera Connect.
Perform further operations using
Camera Connect. For the operation
procedure, see page 35.