Routing Table - Tenda F303 Manual

Note:
1. Gateway must be on the same IP net segment as device's LAN/WAN IP
address.
2. Subnet Mask must be entered 255.255.255.255 if destination IP
address is a host.
3. Subnet Mask must be entered accordingly if destination IP address
represents an IP network segment. It must correspond to the specified
IP address. For example, for IP address of 10.0.0.0, you may enter a
subnet mask of 255.0.0.0.

6.6 Routing Table

This page displays the device core routing table which lists destination IP,
subnet mask, gateway, hop count and interface.
!
The principal task for a router is to look for an optimal transfer path for
each data packet passing through it, and transfer it to the specified
destination. To complete this work, the router stores and maintains related
data of various transfer paths, i.e. establishing a routing table, for future
route selection.