Front Panel Control - HANNspree HT248PPB User Manual

FRONT PANEL CONTROL

 Power Button:
Press this button to switch ON/OFF of monitor's power.
 Power Indicator:
Green — Power On mode.
Amber — Power Saving mode.
 MENU / Enter:
1. Turn the OSD menu on.
2. The OSD menu is used as《Enter》function during OSD start-up.
 Adjust ▲▼:
[The availability of this function depends upon the selected model]
1. Adjust Brightness and volume when the OSD is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
【 i 】Button:

1. Press【 i 】to enter Source selections. (Selections include VGA, HDMI, etc. The actual
selections may very depending on the models. )
2. The OSD menu is used as《Return》function during OSD start-up.
Hotkeys:

1. Restore Brightness and Contrast defaults:
To reset both the Brightness and Contrast to their default values, press the 【▲】 and 【▼】 keys
at the same time.
2. ASPECT RATIO:
Press【MENU】+【▲】key to change to 「FULL MODE」 or 「4:3」.
3. Change Resolution:
For similar screen display resolutions (see table below), the screen resolution can be changed by
pressing the【MENU】+【▲】button to achieve the optimal display quality.
4. Change Preset Mode:
Press【MENU】key for 3 seconds to select one of the following modes「PC」,「MOVIE」,
「GAME」,「ECO」. Default is「PC」.
5.OSD Lock：
Press【MENU】+【i】key for 3 seconds to lock OSD button，repeat this step to unlock
6.Power Lock：
Press【▼】+【i】key for 3 seconds to lock
[The availability of this function depends upon the selected model]
button，repeat this step to unlock
13
User's Manual