Installing The System Into A Rack; Identifying The Sections Of The Rack Rails - Supero 1027R-72BRFTP User Manual

S S
UPER ERVER 1027R-72BRFTP User's Manual
2-5

Installing the System into a Rack

This section provides information on installing the server into a rack unit with the
rack rails provided. There are a variety of rack units on the market, which may mean
the assembly procedure will differ slightly. You should also refer to the installation
instructions that came with the rack unit you are using.

Identifying the Sections of the Rack Rails

You should have received two rack rail assemblies in the rack mounting kit. Each
assembly consists of two sections: an inner fixed chassis rail that secures directly
to the server chassis and an outer fixed rack rail that secures directly to the rack
itself (see Figure 2-1).
Note: The rails will fit a rack between 26" and 33.5" deep.
Figure 2-1. Identifying the Inner Rails and Inner Rail Extensions
Inner Rails
(Inner rails are pre-installed
on the chassis)
2-4
Inner Rail
Extensions