Advertisement
Quick Links
Quick Start Guide
SonicWALL TZ Series Appliances
1
Check Package Contents
Verify that your package includes the following
contents:
SonicWALL TZ 205 or TZ 205W Series Appliance
Ethernet Cable
Standard Power Adaptor and Cord
* Wireless Antennas (2) included with TZ 205W only
Power cord is for use in North America only.
3
Connect the SonicWALL TZ Appliance
Connect the SonicWALL TZ 205 series
appliance to the network using standard
Ethernet cables as shown in the illustration.
Internet
Modem / Router
USB
LAN /
Ethernet
Ethernet
Connect the included power cable and adaptor,
and plug into an appropriate outlet.
lan
The TZ 205 series appliance powers on and the
orange "test" LED blinks during the boot
sequence. Continue to Step 4 when the "test"
LED is no longer lit.
This process may take up to 2 minutes.
Internet
2 min
120V AC
(U.S.)
2
Register
*
Registration MUST be completed prior to
connecting to the appliance.
(TZ Wireless-N)
In a Web browser, navigate to
http://www.mysonicwall.com/
If you do not have a MySonicWALL account,
click the Register Now link to create an
account.
Under the Quick Register section of your
MySonicWALL account, enter the Activation
Key or Serial Number of the SonicWALL TZ
series appliance you are registering.
Con rm your serial number, enter a friendly
name for your appliance, and enter your
authentication code in the Register Product
section.
Click Submit.
4
Configure the Management Host &
Setup Wizard
Using the computer connected to the LAN
port of the SonicWALL TZ 205 series
appliance, navigate to http://192.168.168.168/
in a Web browser.
You may need to con gure the computer with
an IP address on the 192.168.168.0 subnet,
such as 192.168.168.20.
The Setup Wizard takes you through several
basic steps to get your SonicWALL TZ series
appliance con gured for your network.
After the Setup Wizard, the appliance may
reboot. Please wait a few minutes while the
appliance reboots to save the updated settings.
http://www.mysonicwall.com
http://192.168.168.168/
Advertisement
Related Manuals for SonicWALL TZ 205 Series
Summary of Contents for SonicWALL TZ 205 Series
- Page 1 Connect the SonicWALL TZ Appliance Configure the Management Host & Setup Wizard http://192.168.168.168/ The TZ 205 series appliance powers on and the Connect the SonicWALL TZ 205 series appliance to the network using standard orange “test” LED blinks during the boot Using the computer connected to the LAN Ethernet cables as shown in the illustration.
- Page 2 Any changes or modifications not expressly approved by the party responsible for compliance could void the The Lithium Battery used in the SonicWALL security appliance may not be replaced by the user. Return the user’s authority to operate this equipment.