Using Your Dishwasher; Before First Use; Filling With Dishwasher Salt - Baumatic BDWS59SS User Manual

Using your dishwasher

Before first use

o Install the appliance as per the installation instructions contained
within this booklet.
o Add water to the water softener compartment and then add
approximately 2Kg specialist dishwasher salt to the dishwasher.
After this you should set the water softener level.
o Fill the rinse aid dispenser and then set the rinse aid dosage.

Filling with dishwasher salt

IMPORTANT: You should only use salt that is specially
designed for use in a dishwasher. If any other type of salt is
used in the appliance (in particular table salt), it will damage
the water softener.
o Ideally you should fill the water softener with salt, just before you
are about to run a wash program. This will help to clear any salt
that may have overflowed from the water softener during the salt
filling process.
o Open the door of the dishwasher and then remove the lower
basket. The basket should be empty when you remove it.
11
o Turn the
anticlockwise and remove it.
o Pour 500ml of water into the water
softener.
IMPORTANT: It is only necessary to do
this when you fill the container with
salt for the first time.
o Pour salt into the water softener, using
the funnel that is supplied with the
appliance. You should add approximately
2 kg of salt into the water softener.
o It is perfectly normal for a small amount
of water to come out of the water
softener, whilst you are filling it with salt.
This does not mean that the water
softener is filled with the correct amount
of salt.
water softener cap