Table of Contents
Advertisement
adverts or when you are switching channels.
To switch on or off . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Auto volume
leveling.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the menu.
Delta volume
For analog TV and HDMI source only.
Delta volume is a fine volume adjustment for individual channel.
With Delta volume, you can increase the volume for channels
with weaker audio signal or decrease the volume for channels
with stronger audio signal. The setting will be stored for the
specific channels. The TV speakers must to be set to "On".
Clear sound
With Clear Sound, you improve the sound for speech. Ideal for
news programmes. You can switch the speech improvement on
or off.
To switch on or off . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Clear Sound.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the menu.
HDMI ARC
If you do not need an Audio Return Channel (ARC) on any of
the HDMI connections, you can switch the ARC signal off.
For more information, press
ARC.
Audio out format
With Audio out format you can set the audio out signal of the
TV to fit the sound processing capabilities of your Home
Theatre System.
For more information, press
out format.
Audio out levelling
With Audio out leveling you can level the sound volume of the
Home Theatre System with the volume of the TV when you
switch over from one to another.
For more information, press
Keywords and look up HDMI
Keywords and look up Audio
Keywords and look up Audio
out leveling.
Audio out delay
If you set an Audio sync delay on your Home Theatre System,
to synchronise the sound with the picture, you must switch off
Audio out delay on the TV.
For more information, press
out delay.
Audio out offset
If you cannot set a delay on the Home Theatre System, you can
set a delay on the TV with Audio out offset.
For more information, press
out offset.
TV placement
As part of the first installation, this setting is set to either On a
TV stand or Hung on the wall. If you have changed the
placement of the TV since then, adjust this setting accordingly
for best sound reproduction.
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > TV placement and
press OK.
3 - Select On a TV stand or Hung on the wall and press OK.
4 - Press , repeatedly if necessary, to close the menu.
20.4
Ambilight
Ambilight style
Ambilight can have a preset mode or a static mode.
With preset mode, the TV follows the colours of the image on
screen.
With Static, Ambilight has a constant static colour. You can
create an Ambilight static colour yourself.
To select an Ambilight style . . .
1 - Press and press OK.
2 - Select Ambilight style.
3 - Select one of the preset style or Off.
You can also select the Ambilight style in the TV settings menu.
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Ambilight style.
3 - Select one of the preset style or Off.
4 - Press , repeatedly if necessary, to close the menu.
To select a static colour . . .
64
Keywords and look up Audio
Keywords and look up Audio
Advertisement
Table of Contents
