JVC TH-M42 Service Manual page 14

3.1.12 Removing the illumination board
(See Figs.17 and 18)
(1) Open the door assembly of the front panel assembly and
remove the three screws X attaching the door cover to the
door assembly. (See Fig.17.)
(2) Disconnect the card wire from the connector
illumination board. (See Fig.18.)
(3) Take out the illumination board from the door assembly.
1-14 (No.MB067)
CN551 on the
Door cover
Door assembly
Front panel assembly
Door assembly
X
Fig.17
Front panel assembly
Illumination board CN551
Fig.18
Card wire