Related Manuals for Bryston MPS2
Summary of Contents for Bryston MPS2
- Page 1 MPS2 P O W E R S U P P LY OWNER’S MANUAL For use with preamp models BP26, BP26DA, BP26MC, BP26P & BP1.5 10B-EPS crossovers...
-
Page 2: Important Safety Instructions
Bryston authorized dealer to qualify for warranty service. The warranty is transferable from the original owner to a subsequent owner as long as a copy of the bill-of-sale from the original authorized Bryston dealer accompanies the re-sale. The copy of the bill of sale to any subsequent owner need ONLY include the Name of the Bryston Authorized Dealer and the Model and Serial number of the Bryston product The warranty will only be honored in the country of the original purchase unless otherwise pre-authorized by Bryston. - Page 3 (0.5N-m) or less. REMOTE ACTIVATION of OTHER EQUIPMENT VIA THE MPS2 To turn on a Bryston amplifier by turning on the MPS2: 1st) Connect insulated wires from the 2 pin REMOTE TRIGGER connector on the rear panel of the MPS2...
- Page 5 WARNING! The connector terminals of main outputs 1, 2, 3 & 4 on the MPS2 power supply rear panel are HAZARDOUS LIVE and present a risk of electric shock. Use only preassembled power inter- connect cables provided by Bryston for connection of these terminals.
- Page 6 REPLACING FUSES IN THE MPS2 POWER SUPPLY CAUTION: These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.