Advertisement
8
First, remove the two screws and lock washers factory attached to the sideburner valve bracket. Position sideburner
valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes
on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.
Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on
fascia. Attach using two #8-32x3/8" screws and 4mm lock washers. Press sideburner control knob onto valve stem.
Screws and Washers
removed from valve bracket
Sideburner
fascia
Valve stem
9
Insert sideburner burner into left shelf.
shelf, shown A.
Secure burner to sideburner drip pan with one Wing nut, shown B. Make sure burner tube
engages sideburner valve, shown C.
B
Wing nut
C
Note: Use left and right
holes on fascia to
attach valve bracket
Sideburner
valve bracket
The stud on bottom of burner fits into rear small hole in sideburner drip pan on
Sideburner drip pan
Install bezel with "OFF" at top.
Sideburner burner
Sideburner drip pan
Note: Use upper and lower
holes on fascia to
attach bezel
Control knob
Control knob bezel
#8-32x3/8" screw
4mm
lock washer
A
17
Advertisement
