Specifications - Bryston SST CSERIES Brochure & Specs

6B SST C–SERIES
The Bryston 6B SST provides three channels of
powerful amplification in a single chassis. Consisting
of three totally independent amplifier modules, each
with its own power transformer and power supply,
each audio channel will supply effortless power even
to the world's most demanding loudspeakers. The 6B
SST is a convenient solution for home theater left-
center-right amplification and is also a great way of
tri-amplifying 3-way loudspeakers.
3 – channel amplifier
300 W into 8 Ohms
500 W into 4 Ohms

SPECIFICATIONS

Distortion
IM or THD+noise
Noise
Slew rate
Power bandwidth
Damping factor
Input Impedance
AVAILABLE TO ALL SST AMPLIFIERS
< 0.005% from 20Hz to 20kHz at rated output into 8 Ohms
< 0.007% from 20Hz to 20kHz at rated output into 4 Ohms
(Measured with input shorted; 20Hz. to 20kHz.)
>110dB below rated output @ 29dB gain (-75dBu)
>113dB below rated output @ 23dB gain (-78dBu)
>116dB below rated output @ 17dB gain (-78dBu)*
* setting available on models 6B & 9B only
Greater than 60 volts per microsecond
From less than 1 Hz to over 100 kHz
Over 300 at 20 Hz, ref. 8 Ohms
50k Ohms single-ended, 20k Ohms balanced (10k each leg)
EFFORTLESS
3 – position
sensitivity switch:
1V, 2V, or 4V
7
POWER
Polarity
switch
on each
channel