Advertisement
Quick Links
Advertisement
Related Manuals for Bryston 2BSST
Summary of Contents for Bryston 2BSST
- Page 1 POWER AMPLIFIER OWNER’S MANUAL...
-
Page 2: Important Safety Instructions
Bryston authorized dealer to qualify for warranty service. The warranty is transferable from the original owner to a subsequent owner as long as a copy of the bill-of-sale from the original authorized Bryston dealer accompanies the re-sale. The copy of the bill of sale to any subsequent owner need ONLY include the Name of the Bryston Authorized Dealer and the Model and Serial number of the Bryston product The warranty will only be honored in the country of the original purchase unless otherwise pre-authorized by Bryston. -
Page 3: Amplifier Description
The power on/off switch is located on the front panel and is labeled 2BSST. Simply depress the switch to turn on and push again to turn off. The 2BSST may also be powered on using a low voltage trigger. - Page 4 REMOTE POWER CONTROL ~ 12 VOLT TRIGGER CONNECTOR: The 2BSST may be powered on or off using a 12 volt A/C or D/C voltage by using the rear panel 4 position screw terminal connector. Insert the 12 volt wires into the input labeled ‘IN’ (polarity is not important). The power amplifier will now power on when a 12 volt trigger voltage is applied or off when removed.
- Page 5 2Bsst SPECIFICATIONS: Power Output: 100 watts per channel into 8 ohms Input Impedance: 10K ohms single ended (unbalanced) 15K ohms double ended (balanced) Sensitivity: 2v setting 1v setting Distortion: THD+noise: IMD: Noise: Measured with input shorted - 20Hz to 20kHz.
- Page 6 2BSST TWO CHANNEL POWER AMPLIFIER...
- Page 7 2BSST TWO CHANNEL POWER AMPLIFIER...
- Page 8 There are no user serviceable parts inside the 2Bsst. Please refer any servicing to qualified personnel. 2Bsst_MANUAL_20060324...