Hard Disk Drive Error Messages At System Boot; Added Drive Reported As Defective; Error Message On Screen - Fujitsu PRIMERGY BX920 S4 Operating Manual

Troubleshooting and tips
Power budget limit value exceeded
Ê Check whether the power budget limit value set in the management blade
has been exceeded. You may need to install an additional power supply unit.
8.7 Hard disk drive error messages at system
boot
Various hard disk drive error messages may appear when the system is
rebooted. These error messages are caused by modifications in the selected
RAID configuration.
RAID controller configuration incorrect
Ê Check and correct the settings for the drives using the RAID controller
configuration program.
Further information can be found in the operating manual for the RAID
controller.
8.8

Added drive reported as defective

RAID controller is not configured for this drive
The drive was probably installed when the system was switched off.
Ê Reconfigure the RAID controller for the drive using the corresponding utility.
Information is provided in the documentation for the RAID controller.
8.9

Error message on screen

The meaning of the error message is explained in the documentation for the
relevant components and programs on the Fujitsu manuals server.
66 Operating Manual
BX920 S4