Fujitsu PRIMERGY BX920 S4 Operating Manual page 16

Functional overview
I
For more information on configuring the controller, see section
"Configuring the SAS/SATA RAID controller" on page
Slots for expansion cards
The server blade supports two optional mezzanine cards. This enables Fibre
Channel connections, Infiniband connections and/or additional Ethernet
connections to be implemented.
The following mezzanine cards are available for the server blade:
– 1 Gbit/s Ethernet mezzanine card with 4 ports
– 6 Gbit/s SAS HBA mezzanine card
– 6 Gbit/s SAS expander mezzanine card
– 6 Gbit/s SAS RAID mezzanine card
– 8 Gbit/s Fiber channel mezzanine card with 2 ports
– 10 Gbit/s Ethernet mezzanine card with 2 ports
– 10 Gbit/s CNA mezzanine card with 2 ports
– 40-Gbit/s Infiniband mezzanine card with 2 ports
– 56-Gbit/s Infiniband mezzanine card with 2 ports
I
If a server blade is configured with one or two mezzanine cards, this does
not exclude other configurations for any of the other server blades in a
system unit.
If you want to install mezzanine cards in server blades, the system unit
must be fitted with the corresponding Fibre Channel, SAS, Infiniband
and/or Ethernet connection blades. You can find detailed information
about the equipping rules for connection blades in the operating manual
for the system unit.
Mezzanine cards may only be installed and removed by authorized,
qualified personnel. The procedure is described in the PRIMERGY
BX920 S4 server blade Upgrade and Maintenance Manual.
USB flash module (UFM)
A UFM (USB flash module) can also be configured.
16 Operating Manual
55.
BX920 S4