LIGHTING ILLUSTRATIONS
MAIN BURNER LIGHTING
1. Open the top cover or lid.
2.
Turn the main burner control knobs to the
"IGNITE / HI" setting. Push the control knob
until the burner ignites; you should hear a
"clicking" sound if the electronic ignition
system is working properly. The burner
should ignite within 4 seconds (if burner does
not ignite follow match lighting instructions on
Page 18).
3. Once the burner ignites, adjust the
temperature level as desired.
ROTISSERIE BURNER & SEARING SIED
BURNER LIGHTING
1. Push and turn rear burner knob slowly to
"IGNITE / ON" setting, hold in until th
burner is lit up, continue to press and
hold for 15 seconds and release. You
should hear a "clicking" sound if the
electronic ignition system is working
properly. The burner should ignite wi
4 seconds.
(if burner does not ignite follow m
lighting instructions on Page 18).
2. Push and turn searing side burner knob to
"IGNITE / HI" setting, hold in until the
burner ignites. The burner should ignite
within 4 seconds. After ignition, continue to
press and hold for 15 seconds and release.
(if burner does not ignite follow match
lighting instructions on Page 18).
17
e
thin
atch