Speaker Mode; Switching To Mute - Gigaset C590 User Manual

Display with CNIP
If you have CNIP, then the name (town/city)
that is registered with your network provider
for the caller's number will also be displayed.
If the number of the caller is stored in your
directory, the CNIP display is replaced by the
corresponding directory entry.
Ø«Ú
1234567890
Anna Fielding,
London
Accept Silence
1 Caller's number
2 Name and town/city
The display shows:
u
External, if no number is transmitted.
u
Unavailable, if the caller has not
requested Calling Line Identification.

Speaker mode

In speaker mode, instead of holding the
handset to your ear you can put it down, for
example on the table in front of you. This
allows others to participate in the call.
Activating/deactivating speaker
mode
Activating while dialling
~ d
Enter the number and press the
speaker key.
¤
You should inform your caller before you
use the speaker function so that they
know someone else is listening.
Switching between earpiece and
speaker mode
d
During a call, activate or deactivate speaker
mode.
If you wish to place the handset in the base/
charging cradle during a call:
¤
For instructions on how to adjust the loud-
speaker volume,
1

Switching to mute

2
You can deactivate the microphone in your
handset during an external call.
h
Press the speaker key.
Press and hold the speaker key d while
placing the handset in the base.
¢
page 52.
Press key to mute the handset.
The display shows Microphone
is off.
Press the key again to reactivate
the microphone.
Please note
If the telephone is muted, all keys except
the mute key h and the end-call key
a will not work.
Making calls
27