Connecting The Antenna; Connecting To Your Television - Topfield TF 600 PVRt User Manual

12 Setup

2.4.1 Connecting the antenna

2.4.2 Connecting to your television

If you have any problem with your setup or need help, contact
your dealer.
Normally you do that by using a loop cable to link from the RF
LOOP 1 OUT connector to the ANT 1 IN connector.
NOTE
However, if you are in a weak signal area, or are using a signal
amplifier with more than one output, you may achieve better
results by connecting a cable from the antenna or amplifier
directly to the ANT 1 IN connector rather than using the loop
cable.
If you have another digital receiver, or you want to still receive
analogue channels on your television, link it from the RF LOOP
2 OUT connector.
Between all the following connectors of the digital receiver, we
recommend you to use the first connector to get best picture
quality. If your television does not have the matching connector,
Whatever sort of connection you have be-
tween the digital receiver and the television,
you need to connect the digital receiver to
your television antenna so that it can receive
digital television services.
Connect the antenna cable to the ANT 1 IN
connector on the back panel of the digital
receiver.
Also, you must ensure that there is a con-
nection to both the ANT 1 IN and ANT 1 IN
connectors on your digital receiver, so that
both tuners work properly.