Retimewait - Crestron SIMPL+ Reference Manual

Software
®
264 SIMPL+

RetimeWait

Name:
RetimeWait
Syntax:
RetimeWait(INTEGER TIME, NAME);
Description:
Changes the time for a wait event in progress. When a WAIT is retimed, the WAIT
is restarted. For example, if a 5-second wait is 3-second in, and it is retimed to 10-
second, a full 10-seconds must elapse before the WAIT triggers.
Parameters:
TIME is an integer that specifies the new wait time in hundredths of a second. If time
is set to 0, the event will occur immediately.
NAME is a name of a previously defined WAIT event.
Return Value:
None.
Example:
DIGITAL_INPUT Trig, ChangeWaitTime;
PUSH Trig
{
WAIT(1000, FirstWait)
}
PRINT("Wait 1 Triggered!\n");
}
}
PUSH ChangeWaitTime
{
RetimeWait(500, FirstWait);
}
In this example, when Trig is pushed, a 10-second event is scheduled. If
ChangeWaitTime is activated while FirstWait is still running, the time will be reset
to 5-seconds. If FirstWait has expired, no action will be taken.
Version:
SIMPL+ Version 1.00
Crestron SIMPL+
Language Reference Guide - DOC. 5797G
®