Technical Data; Troubleshooting - DeLonghi EC145 Manual

Table of Contents

Advertisement

6. To eliminate residues of the solution and lime scale, rinse
the tank well and fill it with clean water (without des-
caler).
7. rotate the selector dial to the
the appliance until the tank is completely empty;
8. repeat operations 6 and 7 again.

Technical data

mains voltage: ........................................ 220-240V~50/60Hz
Absorbed power: .........................................................1100W
Pressure: ....................................................................... 15 bar
Water tank capacity: ..................................................1.4 litres
Dimensions LxHxD .............................255x315x280 (395) mm
Weight ...........................................................................3.9 kg
Problem
espresso coffee does not flow out
espresso coffee drips from the ed-
ges of the filter-holder instead of
through the holes
The espresso coffee is cold
position and operate
Possible cause
No water in the tank
The holes in the filter-holder are
blocked
The espresso boiler outlet is blocked
The filter-holder is inserted incorrectly
The espresso boiler gasket has lost
elasticity
The holes in the filter-holder spout are
blocked
The espresso ok light is not on when
the coffee dial is rotated to coffee
delivery
Pre-heating has not been carried out
The cups have not been pre-heated
10
The appliance is in compliance with the following
ce Directives:
"Low voltage Directive" 2006/95/CE and successive
amendments.
"EMC Directive" EMC 2004/108/CE and successive amend-
ments.
The materials and objects destined to come into contact
with food stuffs are in compliance with the provisions of
the 1935/2004 european Standard.
None of the components of the appliance can
be washed in a dishwasher.

troubleshooting

Solution
fill the water tank
clean the holes in the filter-holder spouts
clean as indicated in the "cleaning the boiler
outlet" paragraph
Attach the filter-holder correctly and turn it fully
home firmly
replace the espresso boiler gasket. contact
De'Longhi customer experience
clean the holes in the spouts
Wait for the ok light to switch on
Pre-heat as indicated in the paragraph "How to
Prepare espresso coffee"
Pre-heat the cups using hot water
use
en

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents