Table of Contents
Advertisement
there is rinse aid in the rinse
aid dispenser with every wash
and that you refill the rinse aid
dispenser with rinse aid every
time it is empty.
Using two-in-one detergent and
rinse aid
•
These detergents will not give
you the same drying performance
that you can obtain by using
separate detergent, salt and
rinse aid. To increase the drying
performance:
•
Put your appliance's rinse aid
setting at "1" and apply rinse aid.
When the rinse aid is used up,
add more rinse aid to the rinse aid
dispenser.
•
If you use combined detergents
with a rinse aid setting higher
than 1, hand contact may leave
rainbow-coloured water stains on
the washed items and inside the
machine.
•
These detergents do not contain
softening salt so you need to
use the softening setting as
described in the manual, making
sure that there is salt in the water
softener with every wash and
that you refill the water softener
with salt every time it is empty.
Important warning
Should you encounter a problem that
has previously never occured after
you start using these detergents,
contact the detergent manufacturer
directly. You will find contact details
on the packet.
If you stop using this kind of
detergent:
•
Ensure that the salt and rinse aid
dispensers are full.
•
Put the water hardness setting at
the highest level and run a wash
cycle with the appliance empty.
•
After washing while empty,
return the water hardness
setting to the correct level for
your mains water hardness
shown in the manual.
•
Put the rinse aid setting at the
correct level.
Filling detergent dispenser
If the dishwasher is considerably full
and the dishes are relatively dirty, fill
the main container (A) up to 25cm³
level. If the dishwasher is not quite
full and the dishes are only slightly
soiled, fill the main container (A) only
up to 15cm³ level.
If your dishes are kept unwashed for
a long time and the food particles are
stuck on the dishes also fill the small
container (B) up to 5cm³. Depending
15 GB
Advertisement
Table of Contents
