From Another Digital Receiver Via Rs-232 Port - Topfield TF 600 PVRc User Manual

10.5 From another digital receiver via RS-232 port

10.5 From another digital receiver via RS-232 port 79
1. Press the Find button to select the new
2. Press the download button, and then turn
3. A countdown will be displayed on screen
4. Restart the digital receiver when the file
It is possible to transfer the firmware from the digital receiver
to another same digital receiver by connecting them with a RS-
232 cable. To update the firmware with this method, perform
the following steps:
firmware file.
on the digital receiver to start the file trans-
fer.
transfer is complete.
1. Turn off the target digital receiver.
2. Plug one end of a RS-232 cable (9 pin D-
sub cable) into the RS-232 port on the dig-
ital receiver, and the other end into the
matching port on the other digital receiver.
3. Turn on the source digital receiver if not
already on.
4. Select the Installation
Transfer Firmware to Other IRD menu,
then you get asked for confirmation; select
Yes.
5. Turn on the target digital receiver to start
the firmware transfer.
6. A progress bar appears showing the
progress of the firmware transfer.
7. Restart the target digital receiver when the
firmware transfer is complete.
Transfer Firmware